行業標準規范英漢對照-工藝裝備(4)

202 GB/T 5806-1986 銼刀通用技術條件 General technical condition of files

203 GB/T 5807-1986 銼刀試驗方法 Test methods of files

204 GB/T 5808-1986 銼刀檢驗規則、標志與包裝 Test regulations, marking and packaging of files

205 GB/T 5809-1986 銼刀分類、編號規則 Classification and numbering regulations of files

206 GB/T 6060.2-1985 表面粗糙度比較樣塊 磨、車、鏜、銑、插及刨加工表面 Roughness comparison specimens--Ground, turned, bored,milled, shaped and planed

207 GB/T 6060.3-1986 表面粗糙度比較樣塊 電火花加工表面 Roughness comparison specimens--Spark-erosion machining surfaces

208 GB/T 6060.4-1988 表面粗糙度比較樣塊 拋光加工表面 Roughness comparison specimens--Polshed surfaces

209 GB/T 6060.5-1988 表面粗糙度比較樣塊 拋(噴)丸、噴砂加工表面 Roughness comparison specimens--Shot-blasted and grit-blasted surfaces

210 GB/T 6062-1985 輪廓法觸針式表面粗糙度測量儀 輪廓記錄儀及中線制輪廓計 Stylus instruments for the measurement of surface roughness by the profile method profile recording instruments and profile meters by the system M

211 GB/T 6081-1985 直齒插齒刀的基本型式和尺寸 The basic type and dimensions for spur shaper cutters

212 GB/T 6082-1985 直齒插齒刀通用技術條件 The general technical specifications for spur shaper cutters

213 GB/T 6083-1985 齒輪滾刀的基本型式和尺寸 The basic types and dimensions for gear hobs

214 GB/T 6084-1985 齒輪滾刀通用技術條件 The general technical specifications for gear hobs

215 GB/T 6091-1985 刀口形直尺 Straight edge

216 GB/T 6092-1985 90°角尺 Squares 90°

217 GB/T 6093-1985 量塊 Gauge blocks

218 GB/T 6117.1-1996 立銑刀 第1部分: 直柄立銑刀的型式和尺寸 End mills--Part 1: Milling cutters with parallel shanks

219 GB/T 6117.2-1996 立銑刀 第2部分: 莫氏錐柄立銑刀的型式和尺寸 End mills--Part 2: Milling cutters with morse taper shanks

220 GB/T 6117.3-1996 立銑刀 第3部分: 7/24錐柄立銑刀的型式和尺寸 End mills--Part 3: Milling cutters with 7/24 taper shanks

221 GB/T 6118-1996 立銑刀 技術條件 End mills--Technical specifications

222 GB/T 6119.1-1996 三面刃銑刀 型式和尺寸 Side and face milling cutter--Tapes and dimensions

223 GB/T 6119.2-1996 三面刃銑刀 技術條件 Side and face milling cutter--Technical specifications

224 GB/T 6120-1996 鋸片銑刀 型式和尺寸 metal slitting saws--Types and dimensions

225 GB/T 6121-1996 鋸片銑刀 技術條件 metal slitting saws--Technical specifications

226 GB/T 6122-1985 圓角銑刀 Corner-rounding cutters

227 GB/T 6124.1-1996 T型槽銑刀 第1部分: 直柄T型槽銑刀的型式和尺寸 T-slot cutters--Part 1: Dimensions of T-slot cutters with plain or flated parallel shanks

228 GB/T 6124.2-1996 T型槽銑刀 第2部分: 莫氏錐柄T型槽銑刀的型式和尺寸 T-slot cutters--Part 2: Dimensions of T-slot cutters with Morse taper shanks with tapped holes